zyun.moin.jp

M75s-1にFreeBSDをインストールする

セキュアブートを無効にしましょう。 FreeBSD は対応していません。 Ubuntu は有効でも起動できました。

メモリーは CFD Selection W4U3200CM-16G と入れ替えてます。NVMe も増設し、 HDD は取り外しています。

$ cat /var/run/dmesg.boot
---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.1-RELEASE-p3 GENERIC amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(efifb): resolution 800x600
CPU: AMD Ryzen 5 PRO 3400G with Radeon Vega Graphics (3700.08-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0x810f81  Family=0x17  Model=0x18  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ed8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x35c233ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX>
  Structured Extended Features=0x209c01a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x1007<CLZERO,IRPerf,XSaveErPtr>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 31210409984 (29764 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TC-M2C  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
Launching APs: 5 6 4 3 1 7 2
Timecounter "TSC-low" frequency 1850041884 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000023 [4335] netmap_init               netmap: loaded module
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff8112e0f0, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
efirtc0: <EFI Realtime Clock> on motherboard
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto> on motherboard
acpi0: <LENOVO TC-M2C> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
amdsmn0: <AMD Family 17h System Management Network> on hostb0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfcda0000-0xfcda7fff at device 0.0 on pci1
xhci0: 32 bytes context size, 64-bit DMA
xhci0: Unable to map MSI-X table
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
ahci0: <AHCI SATA controller> mem 0xfcd80000-0xfcd9ffff at device 0.1 on pci1
ahci0: AHCI v1.31 with 8 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
ahcich6: <AHCI channel> at channel 6 on ahci0
ahcich7: <AHCI channel> at channel 7 on ahci0
pcib2: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 1.0 on pci2
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 2.0 on pci2
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 3.0 on pci2
pci6: <ACPI PCI bus> on pcib6
pcib7: <ACPI PCI-PCI bridge> at device 4.0 on pci2
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 5.0 on pci2
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 6.0 on pci2
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.0 on pci9
pci10: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 7.0 on pci2
pci11: <ACPI PCI bus> on pcib11
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xfc00-0xfcff mem 0xfcc18000-0xfcc18fff,0xfcc10000-0xfcc13fff at device 0.0 on pci11
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x50000000
re0: MAC rev. 0x00200000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 2c:f0:5d
re0: netmap queues/slots: TX 1/256, RX 1/256
pci11: <simple comms, UART> at device 0.1 (no driver attached)
pci11: <simple comms, UART> at device 0.2 (no driver attached)
pci11: <serial bus> at device 0.3 (no driver attached)
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfcc14000-0xfcc14fff,0xfcc00000-0xfcc03fff at device 0.4 on pci11
ehci0: pre-2.0 USB revision (ignored)
usbus1: EHCI version 1.0
usbus1 on ehci0
usbus1: 480Mbps High Speed USB v2.0
pcib12: <ACPI PCI-PCI bridge> at device 1.6 on pci0
pci12: <ACPI PCI bus> on pcib12
nvme0: <Generic NVMe Device> mem 0xfcf00000-0xfcf03fff at device 0.0 on pci12
pcib13: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci13: <ACPI PCI bus> on pcib13
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xf0000000-0xf01fffff,0xfcb00000-0xfcb7ffff at device 0.0 on pci13
hdac0: <ATI (0x15de) HDA Controller> mem 0xfcbc8000-0xfcbcbfff at device 0.1 on pci13
pci13: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff at device 0.3 on pci13
xhci1: 64 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table
usbus2 on xhci1
usbus2: 5.0Gbps Super Speed USB v3.0
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfc800000-0xfc8fffff at device 0.4 on pci13
xhci2: 64 bytes context size, 64-bit DMA
xhci2: Unable to map MSI-X table
usbus3 on xhci2
usbus3: 5.0Gbps Super Speed USB v3.0
pci13: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD (0x15e3) HDA Controller> mem 0xfcbc0000-0xfcbc7fff at device 0.6 on pci13
pcib14: <ACPI PCI-PCI bridge> at device 8.2 on pci0
pci14: <ACPI PCI bus> on pcib14
ahci1: <AMD KERNCZ AHCI SATA controller> mem 0xfce00000-0xfce007ff at device 0.0 on pci14
ahci1: AHCI v1.31 with 1 6Gbps ports, Port Multiplier supported with FBS
ahcich8: <AHCI channel> at channel 0 on ahci1
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbdc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen2.1: <0x1022 XHCI root HUB> at usbus2
ugen0.1: <0x1022 XHCI root HUB> at usbus0
ugen1.1: <(0x10ec) EHCI root HUB> at usbus1
ugen3.1: <0x1022 XHCI root HUB> at usbus3
uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub2: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
uhub1: <(0x10ec) EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <ADATA SX8200PNP> NVMe namespace
nvd0: 976762MB (2000409264 512 byte sectors)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Analog)> at nid 21 and 24,26 on hdaa1
pcm3: <Realtek ALC662 (Analog)> at nid 20 and 25 on hdaa1
pcm4: <Realtek ALC662 (Front Analog Headphones)> at nid 27 on hdaa1
Trying to mount root from zfs:zroot/ROOT/default []...
Root mount waiting for: usbus3 usbus2 usbus1 usbus0
uhub2: 2 ports with 2 removable, self powered
uhub0: 8 ports with 8 removable, self powered
uhub1: 1 port with 1 removable, self powered
uhub3: 22 ports with 22 removable, self powered
Root mount waiting for: usbus0
ugen0.2: <PFU Limited HHKB-Hybrid> at usbus0
ukbd0 on uhub3
ukbd0: <keyboard> on usbus0
kbd2 at ukbd0
ukbd1 on uhub3
ukbd1: <Multi-Media> on usbus0
kbd3 at ukbd1
bridge10: Ethernet address: 02:d1:98
bridge20: Ethernet address: 02:d1:98
bridge30: Ethernet address: 02:d1:98
lo0: link state changed to UP
re0: link state changed to DOWN
re0.20: link state changed to DOWN
re0.10: link state changed to DOWN
re0.30: link state changed to DOWN
re0: promiscuous mode enabled
bridge10: link state changed to DOWN
re0.10: promiscuous mode enabled
re0.20: promiscuous mode enabled
bridge20: link state changed to DOWN
re0.30: promiscuous mode enabled
bridge30: link state changed to DOWN
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
smbus0: <System Management Bus> on intsmb0
uhid0 on uhub3
uhid0: <PFU Limited HHKB-Hybrid, class 0/0, rev 1.10/0.01, addr 1> on usbus0
AMD-Vi: IVRS Info VAsize = 64 PAsize = 48 GVAsize = 2 flags:0
ivhd0: <AMD-Vi/IOMMU ivhd with EFR> on acpi0
ivhd0: Flag:b0<IotlbSup,Coherent>
ivhd0: Features(type:0x11) MsiNumPPR = 0 PNBanks= 2 PNCounters= 0
ivhd0: Extended features[31:0]:22294ada<PPRSup,NXSup,GTSup,IASup> HATS = 0x2 GATS = 0x0 GLXSup = 0x1 SmiFSup = 0x1 SmiFRC = 0x2 GAMSup = 0x1 DualPortLogSup = 0x2 DualEventLogSup = 0x2
ivhd0: Extended features[62:32]:4f77ef<USSup> Max PASID: 0x2f DevTblSegSup = 0x3 MarcSup = 0x1
ivhd0: supported paging level:7, will use only: 4
ivhd0: device range: 0x0 - 0xffff
ivhd0: PCI cap [email protected] feature:19<IOTLB,EFR,CapExt>
tap0: Ethernet address: 00:bd:4e
tap0: promiscuous mode enabled
tap0: link state changed to UP
bridge20: link state changed to UP
nd6_dad_timer: cancel DAD on tap0 because of ND6_IFF_IFDISABLED.
tap1: Ethernet address: 00:bd:d6
tap1: promiscuous mode enabled
nd6_dad_timer: cancel DAD on tap1 because of ND6_IFF_IFDISABLED.
tap2: Ethernet address: 00:bd:b2
tap2: promiscuous mode enabled
tap2: link state changed to UP
nd6_dad_timer: cancel DAD on tap2 because of ND6_IFF_IFDISABLED.
tap1: link state changed to UP
Security policy loaded: MAC/ntpd (mac_ntpd)
ugen0.2: <PFU Limited HHKB-Hybrid> at usbus0 (disconnected)
ukbd0: at uhub3, port 12, addr 1 (disconnected)
ukbd0: detached
ukbd1: at uhub3, port 12, addr 1 (disconnected)
ukbd1: detached
uhid0: at uhub3, port 12, addr 1 (disconnected)
uhid0: detached
re0: link state changed to UP
re0.20: link state changed to UP
re0.10: link state changed to UP
re0.30: link state changed to UP
bridge10: link state changed to UP
bridge30: link state changed to UP
tap3: Ethernet address: 00:bd:97
tap3: promiscuous mode enabled
tap4: Ethernet address: 00:bd:a2
tap4: promiscuous mode enabled
tap3: link state changed to UP
tap4: link state changed to UP
nd6_dad_timer: cancel DAD on tap3 because of ND6_IFF_IFDISABLED.
tap2: link state changed to DOWN
tap2: Ethernet address: 00:bd:17
tap2: promiscuous mode enabled
tap2: link state changed to UP
nd6_dad_timer: cancel DAD on tap2 because of ND6_IFF_IFDISABLED.
bridge10: promiscuous mode enabled
bridge10: promiscuous mode disabled
tap3: link state changed to DOWN
tap4: link state changed to DOWN
tap2: link state changed to DOWN
tap0: link state changed to DOWN
tap1: link state changed to DOWN
Waiting (max 60 seconds) for system process `vnlru' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 0 0 0 0 0 0 done
Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-1' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-2' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-3' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-4' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-5' to stop... done
Waiting (max 60 seconds) for system thread `bufspacedaemon-6' to stop... done
All buffers synced.
Uptime: 2h21m21s
re0: link state changed to DOWN
re0.20: link state changed to DOWN
re0.10: link state changed to DOWN
re0.30: link state changed to DOWN
bridge20: link state changed to DOWN
bridge10: link state changed to DOWN
bridge30: link state changed to DOWN
re0: link state changed to UP
re0.20: link state changed to UP
re0.10: link state changed to UP
re0.30: link state changed to UP
bridge20: link state changed to UP
bridge10: link state changed to UP
bridge30: link state changed to UP